Aqua Flo® H.E.R.O.™
High Efficiency RO System

The H.E.R.O. wastes virtually no water, offering a 99.9% recovery rate.

Watch the video below for complete HERO installation instructions.

The H.E.R.O. wastes virtually no water, offering a 99.9% recovery rate by collecting purified water in the storage tank and recycling the rinse water back for use throughout the house rather than sending it to the drain.

The system also flushes the membrane with pure RO water every time the tank is full to ensure that high TDS water never creeps through the membrane during low pressure times.

After this flush, the controller de-pressurizes the membrane so that only pure, high quality RO water is produced when the system restarts. This process allows the H.E.R.O to provide up to 99% Total Dissolved Solids (TDS) rejection.

Comparable systems typically waste 4-12 gallons for every gallon of RO water produced.

ADDITIONAL PRODUCT FEATURES:

Heavy duty glass filled polypropylene construction provides double the strength, toughness & durability compared to most other RO’s which are typically constructed with ABS
TFC 75 GPD reverse osmosis membrane provides up to 99% Total Dissolved Solids (TDS) rejection
Pre-filters 10’’ five (5) micron Spun Polypropylene Sediment Cartridge and 10’’ Activated Carbon Cartridge
Quick connect fittings for easy installation
3/8’’ outlet tubing for higher flows
Automatic shut-off valve
An exclusive serviceable check valve that eliminates spring ‘chatter’ noise common in other RO’s